Eizo ColorEdge CG245W 24" LCD Monitor
Built-In Calibration Sensor
A built-in sensor is housed within the monitor’s top bezel and swings down over the center top of the screen when calibration begins. This built-in sensor eliminates the need for a third-party calibration device and even operates in portrait mode.
Using either the OSD menu or the bundled ColorNavigator software, you can schedule the ColorEdge CG245W to self-calibrate at a specific time and at specific intervals. You can even schedule calibration for outside of work hours when your computer is turned off and you are no longer present.
Since the PC itself is not necessary for self-calibration, the ability to calibrate the monitor is not dependent on using an operating system supported by the ColorNavigator software. Therefore, a calibrated ColorEdge CG245W can be used with Linux even though ColorNavigator currently does not support this OS.
Correlation with Other Sensors
The ColorEdge CG245W can be correlated to the measurement results of an external calibration sensor. This is convenient if the ColorEdge CG245W is used in a work environment with other ColorEdge monitors and one measurement device must be used as a standard for all calibrating. Correlation is done with a new “Correlation Utility” included with the bundled ColorNavigator software.
|Screen Size||24.1 inch|
|Maximum Resolution||1920 x 1080 pixels|
|USB Video Inputs||1|
|USB Hub Ports||2|
|Color Gamut %age||93 %|
|Max Refresh Rate||63.0 Hz|
|Response Time||5 ms (Gray-to-gray) ms|